Diatone 2018 GT R90 ARF

WOW! We have been testing this little racer for the month before the release and it was hard to keep it a secret! This 90 mm frame is a step above the other micros in this class. First off, you get a F4 board, not some cheap out dated F1 board. Diatone has also included a micro CCD camera with better resolution then those cheap CMOS all in ones. Here is the kicker. You don't get a cheap 25 mW transmitter. You get a TBS Unify authentic board, adjustable from 25 up to 800 mW via smart audio. No other board in this class has these features.

To tie it all together Diatone has produced a plastic brace to hold the stack and antenna using minimal space under the cage! No like every good commercial, but wait there's more! These also come with a 4 in 1 Bl Heli_S ESC capable of Dshot 600! This ship has been tested on 2-4s and pids for 4s will be out soon!

Yes there are alot of people selling this kit, but they are just companies. 2dogrc not also tests the prototypes, but we help tune the stock PIDS and we know what we are doing!

We found that the items you will break are the roll cage, props, and possible the white FC pedestal in that order.

SKU: DT-PN18-GTR90/207

Shipping March 15th



Additional Info

  • Flight Controller: Fury F4
  • Gyro: MIC20689 32K Six-Axis
  • OSD: Betaflight OSD
  • Blackbox: 128M Flash On board
  • On Board BEC: 1A 1.5 Burst 5V BEC
  • External Sensor: Current Sensor incorporated in the XT30
  • Camera: G1.Sniper CCD Sensor 600 TVL (Similar to HS1177 micro or Swift Micro)
  • VTX: TBS Unify 5V 25/200/500/800
  • ESC: F15HV 4S BL Heli_S ESC, Dshot 600
  • Motor: EDGE Racing 1104 6000KV


Diatone GT-R90Review by Don
If you’re on the fence, buy this quad. Nothing in this price range gives you what you get with this quad. It is unbelievably quick even on 3s, so I haven’t even tried 4s yet. I’m not a fan of the stock props, so I replaced them with Gemfan 2035’s. I got over 6 minutes of flight with GNB 550mah 80c batteries. There’s really only a couple of things I would have done differently if I were designing the quad. I wish their neat little stand for the vtx/esc/fc would have had the vtx on top for better airflow, especially since it can go up to 800mw. Another thing, that I’ve since changed, is that I wish they had ran a u.fl cloverleaf antenna from the vtx, out to the top of the quad. Having the dipole pointed down and out the back of the quad, really limits your fpv transmission when the quad is coming towards you...even at higher power output. I dremeled a small hole in the plastic piece that everyone is zip-tying their antennas to, and ran a 48mm FuriousFPV cloverleaf with a u.fl connector down through it to the unify. I had to trim their little clamp for the stock antenna to make this work, but it turned out great and has made a huge difference in my fpv transmission. Now it checks pretty much every box that I could hope for and it is a steal at the current price point. I love Diatone products, because they all seem to have very good fit and finish! (Posted on 12/4/2017)
QuestionReview by Justin
How can I get the blue ? We only have one color coming, the white. (Posted on 10/30/2017)

Write Your Own Review

You're reviewing: Diatone 2018 GT R90 ARF

How do you rate this product? *

  1 Bone 2 Bones 3 Bones 4 Bones 5 Bones

  • + =

Why Buy From 2dogrc

Why Buy From 2dogrc

Most Products ship the SAME Day!

Have questions? Send us a quick email and we will get back to you fast!

High quality RC products from people who fly RC products!

Buy this product and earn Doggy Dollar loyalty points!