Wraith 32 35A BL Heli 32 ESC

BLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S. BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster. This increased speed will allow for many new features in the Bl Heli 32 code! These esc's do not come with any cables, you only get the ESC PCB.


BL Heli Suite 32

SKU: ABWR35

Availability: In stock

$16.99
$16.99

Description

Details

BLHeli_32 is the third generation BLHeli code, following base BLHeli and BLHeli_S.

BLHeli_32 runs on an ARM 32bit MCU, initially it will be on a Cortex-M0 running at 48MHz, but there are MCUs out there that can run a lot faster.

So what can the increased MCU speed do?
First of all, it can run input signals with lower latency at faster rates. 
Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.

Secondly it allows packing of more functionality. 
- Like programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.

- Like auto timing. Which is not the option to choose if you’re after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.

- Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure.

- Like programmable brake on stop force. Which allows control of the braking of fixed wing props.

- Like improved direction change in bidirectional mode.

- Like more to come in the future. Such as setup from the FC by using Dshot commands. Such as telemetry functionality. There is room to grow performance and functionality.

Features:

  • Build in Current sensor
  • On-Board RGB LED
  • 2-6s LIPO input
  • 35A designed
  • 15*30mm

Package incl.:

  • Wraith32 ESC

Additional Info

No

Reviews

Overall good productReview by Alex
Quality
Service
Value
These esc's perform great especially with the Betaflight F3 flight controller. The only problem I had was that the signal pads are tiny. I almost had a heart attack because i broke 2 of the signal pads when I was soldering but the good thing is that it is double sided so I ended up soldering 2 signals on the bottom. I also added an extra piece of heat shrink to the signal sides. You do have to download the BLHELISUITE32 to access the settings. Overall I'm happy with these esc's. (Posted on 6/10/2017)

Write Your Own Review

You're reviewing: Wraith 32 35A BL Heli 32 ESC

How do you rate this product? *

  1 Bone 2 Bones 3 Bones 4 Bones 5 Bones
Quality
Service
Value


  • + =

Why Buy From 2dogrc

Why Buy From 2dogrc

Most Products ship the SAME Day!

Have questions? Send us a quick email and we will get back to you fast!

High quality RC products from people who fly RC products!

Buy this product and earn Doggy Dollar loyalty points!