Strider Mini 250 Racing Quad V1.1 with OSD

Be the first to review this product

We just picked up this line from Rotor RC a California company. Their new Strider Mini Quad is the top of the line as far as flight performance and technology! This 250 size quad packs an full featured OSD, LED control, Lost Quad alarm, and power regulators into an easy to build platform!  This ship will provide you with a great racing of FPV session packed full of all the information you need, such as timers and battery voltage at your figertips!

We are extremly excited to carry this product!  Not only did we stock these we also built one!  More details to follow on that.  For this kit we recommend the standard 250 setup, 2204 motors will give you out of site performance, but due to to the low weight, even 1806 motors will work great!

The standoffs at 35mm for the center frame, so fitting in a Boscam HD19+ would be a little tight.  We wil most our mod for that shortly!


Availability: Out of stock

Regular Price: $99.00

Now only: $40.00



Instruction Manual: Strider_User_Guide.pdf

Firmware Upgrade Utility:

Introducing a new 250mm size FPV Quadcopter with enormous amount of tech in an extremely compact package.  We've integrated a ton of timely, costly, and complicated external features into the frame to save you money, time, and headaches while delivering the most feature rich balanced mini quad on the market today!

• 128g lightweight, compact, ultra-stiff, folding, 250mm symmetric, & highly durable carbon fiber airframe

• Premium all aluminum and nylon hardware mix for ultimate weight and strength

• Designed for both 5” and 6” props and a unique dual folding mechanism (one for crashes, one for storage)

• Filtered regulated power support for 3S-4S

• Jello-free isolated HD video mount provides silky smooth video

• RROSD (Integrated OSD) timer, voltage, current sensor, RSSI (digital and analog), remotely controlled super bright LEDs and lost model siren.

• Filtered power for FPV transmitter and camera


• Every RROSD will go through extensive QA and functionally tested at the factory.

• RROSD can accept 3s/4s without setting any solder bridges. 2 separate FPV camera connectors to provide 12V and 5V power.

• No more tolerance issue between FPV camera mounting plate and resistor. 

• LEDS are much brighter, red in rear and green in front.

• Captive nuts are factory installed.


• 3k twill weave Carbon Lower Plate, Upper Plate, 4x Arms, HD camera mount, G10 FPV cam plate.

• RROSD PDB (center plate).

• Premium lightweight and durable anodized aluminum and nylon hardware set.


• Perfect X symmetry, ultra stiff and light frame design provides for the best possible flight characteristics

• Rugged, stiff, and durable carbon fiber frame designed to survive non-stop crashes

• Lightweight and ultra compact folding frame weighs only 128g and measures 208mm x 65mm x 40mm folded up

• Support for both 5” and 6” propellers with extending arms and on the fly configuration swap; measures 250mm -264mm

• Vibration isolation mount allows for silky smooth HD recording

• Forward oriented chassis design provides a 123 degree horizontal FOV for you HD camera with no extension plates required on both 5” and 6” prop configurations

• Pop Slot allows the arms to 'give’ on a crash to absorb impact and still allow take-off w/o fear of props hitting chassis, quick reset design allows you to quickly reset arms to the preconfigured position instantaneously

• All ESCs mount within the chassis and a minimal arm profile provides maximum lift with minimal prop wash loss

• M2 12 x 16mm and M3 16 x 19mm bolt patterns fits a wide variety of motors


• Built-in power distribution and regulators to handle 3S and 4S systems

• 12V and 5V output for FPV cam

• Accurate flight pack voltage, current draw, and mAh consumption display

• RSSI (digital and analog compatible) displays in percentage

• Remote control crosshair in OSD

• Autoflight timer

• Remote control of super bright LEDs for orientation and chasing

• Remote lost model siren

• Programmable alarms for pack voltage & current consumption

• Firmware Upgradable (currently on FW version 3)

What You Need To Add: 

Flight Controller, Video Transmitter, FPV Camera, 4x Motors, 4x ESCs, Battery, and Propellers.

Recommended Electronics: 

USB Firmware Upgrade Programmer 

• Flight Controller: Naze32 or CC3D

• Speed Controllers: ZTW 12A ESC's 1 Mantis with BEC and 3 Spyder without BEC

• Motors: Emax 2204 2230KV Motors

• Video Transmitter: 5.8Ghz 600mw

• Video Antenna: Cloverleaf or Skew Planer Wheel

• Flight Camera: 800 TVL FPV or Boscam HD19+ Camera and recorder

• Batteries: 3s 1500-2200

• Propellers: 6x3CF ..more props options coming March 15th.

Additional Info



Write Your Own Review

You're reviewing: Strider Mini 250 Racing Quad V1.1 with OSD

How do you rate this product? *

  1 Bone 2 Bones 3 Bones 4 Bones 5 Bones

  • + =

Why Buy From 2dogrc

Why Buy From 2dogrc

Most Products ship the SAME Day!

Have questions? Send us a quick email and we will get back to you fast!

High quality RC products from people who fly RC products!

Buy this product and earn Doggy Dollar loyalty points!

You may also be interested in the following product(s)

Damping Rubber Ball Set, 10 pcs

Damping Rubber Ball Set, 10 pcs

2 Review(s)

Regular Price: $2.25

Now only: $1.00

M3x6 Quad Screw Pack, 20 pcs

M3x6 Quad Screw Pack, 20 pcs

Regular Price: $2.50

Now only: $1.50

M3x8 Quad Screw Pack, 20 pcs

M3x8 Quad Screw Pack, 20 pcs

Regular Price: $2.50

Now only: $1.50

M3x10 Quad Screw Pack, 20 pcs

M3x10 Quad Screw Pack, 20 pcs

Regular Price: $2.50

Now only: $1.50

M3 Lock Nuts Pack, 20 pcs

M3 Lock Nuts Pack, 20 pcs

Regular Price: $2.50

Now only: $1.50

M3x37 mm Aluminum Standoffs, Black

M3x37 mm Aluminum Standoffs, Black

Regular Price: $5.99

Now only: $1.50