Emax Nighthawk X4

6 Item(s)

Set Ascending Direction
per page

Grid  List 

  • Foxeer HS1190 Arrow V3 600TVL Camera, OSD

    These cameras are very similar to the HS1177. The main difference is that these have a built in OSD. These OSD can display battery voltage, and timer. The battery voltage is provided by wiring directly from your battery to the appropriate connector on the back of the camera. These also have metal inserts that the the mounting screws of into.

    • IR Blocked
    • 2.8 mm Lens
    • Connector on the top
    • OSD with Battery Voltage and timer
    Learn More
    $45.00

  • Foxeer HS1177 XAT600M Sony Super CAD 600TVL Camera

    3 Review(s)

    This is a wonderful camera for FPV use. It adopts 1/3 inch Sony Super HAD II CCD, Nextchip 2040 DSP, which provide 600TVL high resolution. Besides, DWDR 2D DNR, 0.01 lux minimum illumination as well as powerful OSD make it excellent for FPV. It features 5~22V wide range input voltage which allows you change battery without worries. The camera case measures 26*26mm, a mini size to fit most of the drones on the market, 3 holes bracket is more convenient to install.

    • IR Blocked
    • 2.8 mm Lens
    • Connector on the bottom
    Learn More
    $45.00

  • Emax RS2205S 2300 Kv New Race Edition Motors

    1 Review(s)

    The completely redesigned RS2205-S is upgraded with features racing multirotors absolutely need. The motor is lighter, yields faster bell rotational response, higher thrust, uses premium materials and backed with EMAX's legendary production quality. 

    These only come in regular thread.

    For a complete review with prop data, please visit miniquadtestbench.com.

    Learn More
    $19.99

  • Diatone HS1177 Sony Super CAD 600TVL Camera

    This is a wonderful camera for FPV use. It adopts 1/3 inch Sony Super HAD II CCD, Nextchip 2040 DSP, which provide 600TVL high resolution. Besides, DWDR 2D DNR, 0.01 lux minimum illumination as well as powerful OSD make it excellent for FPV. It features 5~22V wide range input voltage which allows you change battery without worries. The camera case measures 26*26mm, a mini size to fit most of the drones on the market, 3 holes bracket is more convenient to install. These are the replacement cameras for the Diatone Crusader 2 series.

    • IR Blocked
    • 2.8 mm Lens
    • Connector on the top.
    Learn More
    $29.99

  • DIATONE Stackable SP3 40CH Raceband Switchable 0/25/200/600mw Video Transmitter with OSD and Pigtail SMA

    This is the direct replacement for the stock transmitter on the Diatone Crusader. This has a 90 degree horizontal antenna connector. This is a stackable component that will align with your FC mounting holes and is compatible with Fatshark or Immersion RC products. You can set the channel on these to match any receiver.  

    This is the perfect size for close in FPV racing like at a local flying field or football size field. You should be able to get 5--8 racers up with no interference. Due to varying voltage from ESC's we recommend using 12V regulated power, not 4s directly.

    There are 2 lights on the side the display the power form , 0.05mW (light off), 25mW(blue), 200 mW (red), 600 mW (red and blue). A short press of the button changes the channel, a 2 sec hold changes the band and a 10 sec hold changes the power.

    Always make sure to have an antenna attached when power is supplied or you will melt the transmitter.

    Some countries require a license when operating this equipment.  Check your local laws.

    Learn More
    $39.99

  • EMAX Nighthawk-X4, 170mm Race Quad with PDB

    The Nighthawk-X4, X5, and X6 are EMAX’s first pure X frames with equidistant motor placement and centered mass for the ultimate in balance and agility. For ultra clean builds, our team created a custom PDB with Dual Shielded Voltage Regulators, integrated XT60 battery connector, low voltage buzzer and programmable LED strip.

    Learn More

    Regular Price: $59.00

    Now only: $45.00

6 Item(s)

Set Ascending Direction
per page

Grid  List