Video Transmitters

Items 1 to 10 of 15 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  • DIATONE Stackable SP3 40CH Raceband Switchable 0/25/200/600mw Video Transmitter with OSD and Pigtail SMA

    This is the direct replacement for the stock transmitter on the Diatone Crusader. This has a 90 degree horizontal antenna connector. This is a stackable component that will align with your FC mounting holes and is compatible with Fatshark or Immersion RC products. You can set the channel on these to match any receiver.  

    This is the perfect size for close in FPV racing like at a local flying field or football size field. You should be able to get 5--8 racers up with no interference. Due to varying voltage from ESC's we recommend using 12V regulated power, not 4s directly.

    There are 2 lights on the side the display the power form , 0.05mW (light off), 25mW(blue), 200 mW (red), 600 mW (red and blue). A short press of the button changes the channel, a 2 sec hold changes the band and a 10 sec hold changes the power.

    Always make sure to have an antenna attached when power is supplied or you will melt the transmitter.

    Some countries require a license when operating this equipment.  Check your local laws.

    Learn More
    $39.99

  • 40 Channel Raceband 5.8 GHz 200 mW FPV Wireless AV Transmitter, Horizontal Connector

    1 Review(s)

    This has a 90 degree horizontal antenna connector.

    This is a nice and powerful 5.8 GHz 200 mW FPV video transmitter.  Each transmitter has been tested at the factory to ensure you get a quality product.  This are easy to hook up with clear directions and wiring diagrams.  With this power and a good line of sight, you would easily be able to fly around your local flying site with a good solid picture. This is compatible with Fatshark or Immersion RC products. You can set the channel on these to match any receiver.  

    This is the perfect size for close in FPV racing like at a local flying field or football size field. You should be able to get 5--8 racers up with no interference. We recommend upgrading the antennas for a clearer signal, not the power in this situation!

    Always make sure to have an antenna attached when power is supplied or you will melt the transmitter.

    Some countries require a license when operating this equipment.  Check your local laws.

    Learn More
    $37.99

  • Diatone SP240 Ch 5.8 GHz 0/25/200 mW Stackable FPV Transmitter

    This is the direct replacement for the stock transmitter on the Diatone Crusader. This has a 90 degree horizontal antenna connector. This is a stackable component that will align with your FC mounting holes and is compatible with Fatshark or Immersion RC products. You can set the channel on these to match any receiver.  

    This is the perfect size for close in FPV racing like at a local flying field or football size field. You should be able to get 5--8 racers up with no interference. Due to varying voltage from ESC's we recommend using 12V regulated power, not 4s directly.

    There are 2 lights on the side the display the power form , 0.05mW (light off), 25mW(blue) and 200 mW (red). A short press of the button changes the channel, a 2 sec hold changes the band and a 10 sec hold changes the power.

    Always make sure to have an antenna attached when power is supplied or you will melt the transmitter.

    Some countries require a license when operating this equipment.  Check your local laws.

    Learn More
    $29.99

  • TBS UNIFY PRO 5G8 HV - RACE (SMA)

    1 Review(s)
    Distilling the smallest, lightest and most powerful video transmitters (aka "the golden standard" :) ) down to a bare minimum for FPV racing, at a very attractive price!

    Instruction Manual Learn More

    $29.95

  • 40 Ch Raceband 5.8 GHz 200 mW FPV Transmitter, 100mm Lead

    This is compatible with Fatshark or Immersion RC products. You can set the channel on these to match any receiver. These come with a 100mm coaxial lead with a SMA connector.

    This is the perfect size for close in FPV racing like at a local flying field or football size field. You should be able to get 5-8 racers up with no interference. We recommend upgrading the antennas for a clearer signal, not the power in this situation!

    Always make sure to have an antenna attached when power is supplied or you will melt the transmitter.

    Some countries require a license when operating this equipment.  Check your local laws.

    MAX input voltage of 12V!

    Learn More

    Regular Price: $37.99

    Now only: $25.00

  • Emax Babyhawk 25-200 mW VTX and Camera

    This is a replacement for the stock Emax Babyhawk video transmitter and camera. These are adjustable 25 or 200 mW and are 40 channel. Learn More
    $24.99

  • iFlight the Force 5.8G 48CH 25MW 200MW 600MW Switchable FPV Transmitter

    This is a stackable, variable power VTX that can be powered by up to 24V!

    This VTX is easily stackable under your FC. You can also set the VTX to change channel, not band , via a switch on your radio. This is not smart audio. Learn More

    $24.99

    Out of stock

  • 40 Channel with Raceband 5.8 GHz 25 mW FPV Wireless AV Transmitter

    This is a nice and powerful 5.8 GHz 25mW FPV video transmitter.  Each transmitter has been tested at the factory to ensure you get a quality product.  This are easy to hook up with clear directions and wiring diagrams.  With this power and a good line of sight, you would easily be able to fly around your local flying site with a good solid picture. This is compatible with Fatshark or Immersion RC products. You can set the channel on these to match any receiver.  

    This is the perfect size for close in FPV racing like at a local flying field or football size field. You should be able to get 5--8 racers up with no interference. We recommend upgrading the antennas for a clearer signal, not the power in this situation!

    Always make sure to have an antenna attached when power is supplied or you will melt the transmitter.

    Some countries require a license when operating this equipment.  Check your local laws.

    Learn More

    Regular Price: $34.50

    Now only: $18.00

  • 5.8 GHz 400 mW FPV Wireless AV Transmitter

    CHECK WIRE Colors and Description BEFORE plugging the power to the transmitter. Make SURE the power leads are correct!

    This is a nice and powerful 5.8 GHz 400 mW FPV video transmitter.  Each transmitter has been tested at the factory to ensure you get a quality product.  This are easy to hook up with clear directions and wiring diagrams.  With this power and a good line of sight, you would easily be able to fly around your local flying site with a good solid picture.

    Learn More

    Regular Price: $63.99

    Now only: $15.00

  • Boscam Hd19+ to 58600 Video Transmitter Cable

    This cable provides for a quick and easy FPV setup.  With this cable you can plug the Boscam HD19+ into the Boscam 58600 Video tranmitter and a power supply without any soldering.  The power end is a femail JST connector that will provide power for the Boscam HD19+ and the 58600 Transmitter.  This is a great simple solution for a great FPV setup!

    The two white plugs look identical, but the wiring is different on each one.  PLEASE CHECK THE PICTURES for proper connection.  If you plug the wrong white connector in the wrong device they will be shorted out!

    This is for the cable only. The Boscam Hd19+ and Transmitter are not included!

    Learn More
    $7.99

Items 1 to 10 of 15 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2