FuryF3 Board

We are running our final pre-production run and expect a full production run August.

This is the design from KC10Kevin on RCG Groups with whom we have permission and are woking in conjunction with.


Instruction Manual



If you have never flown a F3 board at 8k, you are missing out! Here is a quick rundown of why you should buy this board!


  • SPI Gyro: This a faster communication then SPI (which most other F3 boards have)
  • MPU6000: The 6000 gyro is less sensitive to noise then the 9250 or 6500. There is no need to soft mount the controller
  • On Board SD Card: The on board SD card lets you log all your flights without the concern of storage space. On board memory cards can hold only 2-3 mins of flight.
  • Tested!: This board has been tested for nearly a year by RCgroups fans!

SKU: FuryF3

Availability: Out of stock

$34.00
  • Buy 5 for $32.00 each and save 6%

Description

Details

This board is coming soon. We are running our final pre-production run and expect a full production run August.

This is the design from KC10Kevin on RCG Groups we are working in coordination with him.

Why should you buy this board? It is one of the easiest boards to tune on the market. You have a powerful F3 processor and a gyro that is not noise sensitive like other F3 boards currently available. The onboard SD card makes logging very easy and more storage then you can use in a week. With the SPI interface you are getting the fastest possible communication allowing you to run the board MUCH faster then a Naze or even other F3 targets! The board features solder tabs instead of through holes allowing for fast assemble as well.

Overview Video

There is one issue that is Betaflight 2.9.1 firmware related (see below) on the board that you must be aware of. If you do not have an SDCard in the slot, you MUST wait at least 16 seconds before arming the board to fly. If you do not, the board will fly out of control.

This has been fixed in Betaflight 3.0.0 RC and will be incorporated in the final release as well.

Background on this issue: As mentioned above, this is not hardware related. All other boards with SDCard slot exhibit the same behavior (<=2.9.1) as the FuryF3. The firmware looks for the SDCard on boot up. If the card is not found by the firmware, it waits 2 seconds and looks again, then waits 2 seconds, etc. It does this 8 times. During this time, the flight controller is pretty much locked up, but may possibly be armed. If armed and attempted to fly during this time, it WILL fly uncontrollably endangering you or others.

Available options:

  • 1. Always fly with an SDCard in the Slot.
  • 2. Wait at least 16 seconds after applying battery power before arming the board.
  • 3. Download and flash the Betaflight 3.0.0 RC firmware. It flies beautifully!!

This is not just a good board, it is the BEST F3 board available!

This board will have the following features:

  • Standard 36x36 Board (30.5x30.5 mounting)
  • STM32F303CCT6: 32-Bit, 72MHz, 256K
  • 3 hardware serial ports.
  • USB VCP (can be used at the same time as the serial ports).
  • 4 PWM outputs (dedicated for quads).
  • Dedicated 3.3v regulator for external devices/Spektrum (up to 500mA)
  • Dedicated PPM/SerialRX input header pins.
  • Dedicated SPEKTRUM adapter port.
  • Dedicated I2C headers.
  • MPU6000 SPI Acc/Gyro
  • Blackbox Support, On-Board MicroSD Card Support
  • Voltage monitoring (built in Voltage divider)
  • Current monitoring (additonal sensor required)
  • RSSI monitoring
  • Buzzer Connector
  • LED Strip Connector
  • SWD Port
  • Direct mounting option for a Pololu switching regulator for up to 6S lipo operation.
  • Official Betaflight Support

Additional Info

This is not just a good board, it is the BEST F3 board available!

This board will have the following features:

  • Standard 36x36 Board (30.5x30.5 mounting)
  • STM32F303CCT6: 32-Bit, 72MHz, 256K
  • 3 hardware serial ports.
  • USB VCP (can be used at the same time as the serial ports).
  • 4 PWM outputs (dedicated for quads).
  • Dedicated 3.3v regulator for external devices/Spektrum (up to 500mA)
  • Dedicated PPM/SerialRX input header pins.
  • Dedicated SPEKTRUM adapter port.
  • Dedicated I2C headers.
  • MPU6000 SPI Acc/Gyro
  • Blackbox Support, On-Board MicroSD Card Support
  • Voltage monitoring (built in Voltage divider)
  • Current monitoring (additonal sensor required)
  • RSSI monitoring
  • Buzzer Connector
  • LED Strip Connector
  • SWD Port
  • Direct mounting option for a Pololu switching regulator for up to 6S lipo operation.
  • Official Betaflight Support

Reviews

A Class Customer ServiceReview by Albert
Quality
Service
Value
Haven't had a chance to complete installation of the furyF3 fc but could not wait any longer to mention the stellar customer service from 2dogrc Customer Support, I won't go into details just that Mark Grohe was awesome. Highly recommend purchasing from 2dogrc. (Posted on 12/27/2016)
Very good Flight ControlerReview by Mike
Quality
Service
Value
I have been flying for about a year now. I started flying a 250mm quad with a CC3D. I then moved to the Naze32. I purchased the FuryF3 board a couple of weeks ago and replaced my Naze32 on a 180mm lizard frame. There is simply no comparison. The FuryF3 is more responsive and more locked in.

The solder pads made it very easy to install and I like the lay out. You can tell someone spent a lot of time thinking about the layout and features of this board.

I am looking forward to the FuryF4


*************************************
Thank you for the compliments. We will keep you informed on the new releases! (Posted on 10/21/2016)
Fantastic FC, great serviceReview by Kroma
Quality
I ordered this when there was officially no stock, but 2dogRC called me up and ordered to have one of the last batch of pre-production boards sent from the designer. Of course I accepted.

This board is nicely laid out and was has great features. I have been flying this board for a few weeks now under BetaFlight 3.0 and my Owl has never flown better. Check out the review by Joshua Bardwell on YouTube for this board. I bought this board based on that review and won't hesitate to build another quad around the FuryF3 (Posted on 10/1/2016)

Write Your Own Review

You're reviewing: FuryF3 Board

How do you rate this product? *

  1 Bone 2 Bones 3 Bones 4 Bones 5 Bones
Quality
Service
Value


  • + =

Why Buy From 2dogrc

Why Buy From 2dogrc

Most Products ship the SAME Day!

Have questions? Send us a quick email and we will get back to you fast!

High quality RC products from people who fly RC products!

Buy this product and earn Doggy Dollar loyalty points!