Diatone SP240 Ch 5.8 GHz 0/25/200 mW Stackable FPV Transmitter

Be the first to review this product

This is the direct replacement for the stock transmitter on the Diatone Crusader. This has a 90 degree horizontal antenna connector. This is a stackable component that will align with your FC mounting holes and is compatible with Fatshark or Immersion RC products. You can set the channel on these to match any receiver.  


This is the perfect size for close in FPV racing like at a local flying field or football size field. You should be able to get 5--8 racers up with no interference. Due to varying voltage from ESC's we recommend using 12V regulated power, not 4s directly.


There are 2 lights on the side the display the power form , 0.05mW (light off), 25mW(blue) and 200 mW (red). A short press of the button changes the channel, a 2 sec hold changes the band and a 10 sec hold changes the power.


Always make sure to have an antenna attached when power is supplied or you will melt the transmitter.


Some countries require a license when operating this equipment.  Check your local laws.


SKU: DT-VTX-SP2

Availability: In stock

Only 2 left
$29.99
$29.99

Description

Details

This is a nice and powerful 5.8 GHz 200 mW FPV video transmitter.  Each transmitter has been tested at the factory to ensure you get a quality product.  This are easy to hook up with clear directions and wiring diagrams.  With this power and a good line of sight, you would easily be able to fly around your local flying site with a good solid picture. This is compatible with Fatshark or Immersion RC products. You can set the channel on these to match any receiver.  

This is the perfect size for close in FPV racing like at a local flying field or football size field. You should be able to get 5-8 racers up with no interference. We recommend upgrading the antennas for a clearer signal, not the power in this situation!

Always make sure to have an antenna attached when power is supplied or you will melt the transmitter.

Some countries require a license when operating this equipment.  Check your local laws.

There are 2 lights on the side the display the power form , 0.05mW (light off), 25mW(blue) and 200 mW (red). A short press of the button changes the channel, a 2 sec hold changes the band and a 10 sec hold changes the power.

Channel Description:

  • FR1 (F) 5740,5760,5780,5800,5820,5840,5860,5880
  • FR2 (E) 5705,5685,5665,5645,5885,5905,5925,5945
  • FR3 (A) 5865,5845,5825,5805,5785,5765,5745,5725
  • FR4 (R) 5658,5695,5732,5769,5806,5843,5880,5917
  • FR5 (B) 5733,5752,5771,5790,5809,5828,5847,5866

Additional Info

Channel Description

  • FR1 (F) 5740,5760,5780,5800,5820,5840,5860,5880
  • FR2 (E) 5705,5685,5665,5645,5885,5905,5925,5945
  • FR3 (A) 5865,5845,5825,5805,5785,5765,5745,5725
  • FR4 (R) 5658,5695,5732,5769,5806,5843,5880,5917
  • FR5 (B) 5733,5752,5771,5790,5809,5828,5847,5866

Modulate

Wideband FM Modulate

Video Format

NTSC/PAL

Output Impedance

50 Ohm

Output Power

23-24dBm

Channel

40 CH

Operating Voltage

12V (7V-20V)

Supply Current

200mA

Operating Temperature

-10~85°C

Video Band Width

0~8.0 MHz

Audio Carrier Frequency

6.5 MHz

Video Input Level

0.8~1.2 Vp-p

Video Input Impedance

75 Ohm

Audio Input Level

0.5~2.0 Vp-p

Audio Input Impedance

10K Ohm

Connector

SMA Female (outer hole)

Dimension

30mm x 22mm x 8mm

Weight

9g

Reviews

Write Your Own Review

You're reviewing: Diatone SP240 Ch 5.8 GHz 0/25/200 mW Stackable FPV Transmitter

How do you rate this product? *

  1 Bone 2 Bones 3 Bones 4 Bones 5 Bones
Quality
Service
Value


  • + =

Why Buy From 2dogrc

Why Buy From 2dogrc

Most Products ship the SAME Day!

Have questions? Send us a quick email and we will get back to you fast!

High quality RC products from people who fly RC products!

Buy this product and earn Doggy Dollar loyalty points!

You may also be interested in the following product(s)