Sale

40 Channel Raceband 5.8 GHz 200 mW FPV Wireless AV Transmitter, Horizontal Connector

This has a 90 degree horizontal antenna connector.

This is a nice and powerful 5.8 GHz 200 mW FPV video transmitter.  Each transmitter has been tested at the factory to ensure you get a quality product.  This are easy to hook up with clear directions and wiring diagrams.  With this power and a good line of sight, you would easily be able to fly around your local flying site with a good solid picture. This is compatible with Fatshark or Immersion RC products. You can set the channel on these to match any receiver.  


This is the perfect size for close in FPV racing like at a local flying field or football size field. You should be able to get 5--8 racers up with no interference. We recommend upgrading the antennas for a clearer signal, not the power in this situation!


Always make sure to have an antenna attached when power is supplied or you will melt the transmitter.


Some countries require a license when operating this equipment.  Check your local laws.


SKU: SFX796T

Availability: In stock

Regular Price: $37.99

Now only: $14.99

Regular Price: $37.99

Now only: $14.99

Description

Details

This is a nice and powerful 5.8 GHz 200 mW FPV video transmitter.  Each transmitter has been tested at the factory to ensure you get a quality product.  This are easy to hook up with clear directions and wiring diagrams.  With this power and a good line of sight, you would easily be able to fly around your local flying site with a good solid picture. This is compatible with Fatshark or Immersion RC products. You can set the channel on these to match any receiver.  

This is the perfect size for close in FPV racing like at a local flying field or football size field. You should be able to get 5--8 racers up with no interference. We recommend upgrading the antennas for a clearer signal, not the power in this situation!

Always make sure to have an antenna attached when power is supplied or you will melt the transmitter.

Some countries require a license when operating this equipment.  Check your local laws.

Channel Description:

  • FR1 (F) 5740,5760,5780,5800,5820,5840,5860,5880
  • FR2 (E) 5705,5685,5665,5645,5885,5905,5925,5945
  • FR3 (A) 5865,5845,5825,5805,5785,5765,5745,5725
  • FR4 (R) 5658,5695,5732,5769,5806,5843,5880,5917
  • FR5 (B) 5733,5752,5771,5790,5809,5828,5847,5866

Additional Info

Channel Description

  • FR1 (F) 5740,5760,5780,5800,5820,5840,5860,5880
  • FR2 (E) 5705,5685,5665,5645,5885,5905,5925,5945
  • FR3 (A) 5865,5845,5825,5805,5785,5765,5745,5725
  • FR4 (R) 5658,5695,5732,5769,5806,5843,5880,5917
  • FR5 (B) 5733,5752,5771,5790,5809,5828,5847,5866

Modulate

Wideband FM Modulate

Video Format

NTSC/PAL

Output Impedance

50 Ohm

Output Power

23-24dBm

Channel

40 CH

Operating Voltage

12V (7V-20V)

Supply Current

200mA

Operating Temperature

-10~85°C

Video Band Width

0~8.0 MHz

Audio Carrier Frequency

6.5 MHz

Video Input Level

0.8~1.2 Vp-p

Video Input Impedance

75 Ohm

Audio Input Level

0.5~2.0 Vp-p

Audio Input Impedance

10K Ohm

Connector

SMA Female (outer hole)/RP-SMA Female (outer needle)

Antenna Connector

SMA Male (Inner needle)/ RP-SMA Male (Inner hole)

Dimension

31mm x 22mm x 10mm

Weight

9g

Reviews

Disappointing Review by Robert
Quality
Service
Value
The transmitter burned up. It was caused by voltage within the 6-20 volts as the manual and transmitter noted it should handle. The manual is wrong and it only takes 12 volts.
*****************
The manual does say 6-20 volts, but the sticker we added to the box says 12V only. If you have any questions, feel free to call or email before you connect and we can clarify and discrepancies. (Posted on 12/24/2017)
Not so goodReview by Rob
Quality
Service
Value
I flew with this video transmitter 15 times and it burnt out. It worked well while it worked. It was connected to vbat power which is 16.8 volts. The manual and transmitter noted it takes 6-20 volts. On the box it came in it notes 12 volts max. I dont know what voltage it truely handles.Il see what customer service will do

*****************
2dogrc Reply:
The manual was wrong and that is why we put 12V stickers on the boxes. If you ever have questions on a product, please send us an email BEFORE you build or power up. (Posted on 12/21/2017)
Good buyReview by Dexter
Quality
Service
Value
This is a little but perfect video transmitter. Clear video while flying. (Posted on 5/17/2016)

Write Your Own Review

You're reviewing: 40 Channel Raceband 5.8 GHz 200 mW FPV Wireless AV Transmitter, Horizontal Connector

How do you rate this product? *

  1 Bone 2 Bones 3 Bones 4 Bones 5 Bones
Quality
Service
Value


  • + =

Why Buy From 2dogrc

Why Buy From 2dogrc

Most Products ship the SAME Day!

Have questions? Send us a quick email and we will get back to you fast!

High quality RC products from people who fly RC products!

Buy this product and earn Doggy Dollar loyalty points!

You may also be interested in the following product(s)